Exit Devices Trim & Accessories

LE – Lever Escutcheon Trim

  • Exit DeviceANSI A156.3, Grade 1
  • Meets ADA requirements ANSI A117.1
  • Steel, Zinc Dichromated Chassis – Stainless Steel Exterior Housing
  • Heavy Duty trim option for use with all 1000 & 2000 series exit devices
  • Thru bolted design thru bolts to head of exit device
  • 5/16″ Square, Steel – Machined & Heat Treated
  • 5″ Solid Stainless Steel lever – 2 7/8″ total projection
  • Lever Designs: Flat (standard, shown above) Curved lever available in US32D only
  • Escutcheon: 3″ Wide x 9″ Height x 3/4″ Projection – Will cover 161 door prep
  • Non-Handed, Field selected at the time of installation
  • Door Thickness: 1 3/4″ standard- Thick door kits available for 2″ thick doors
  • Functions: 02DT Dummy, 08 Entry (convertible to 03NL – Night latch), 08A Passage
  • Fasteners: Includes thru bolt posts and 1/4″-20 machine screws for installation
  • Cylinder: 1 1/8″ Mortise cylinder with std. cam (included) – 6 Pin Brass, C Kwy, with 2 Keys
  • Optional Cylinder: 1 3/8″ Mortise cylinder housing for 6 or 7 pin Small format IC core (less core)
  • Optional Keyways: 11 Popular competitor keyways available with replacement cylinders
  • Finishes: US3, US4 , US10B, US26, US32D
  • Accessories: 1/8″ Cylinder collar spacer rings – (2 are supplied with IC housings)
  • Electrified Options: 12 or 24 Volt (AC/DC) Fail Safe (Electrically Locked), Fail Safe (Electrically Unlocked)
  • Limited Lifetime Warranty

KIL – Key in Lever Trim

  • KILANSI A156.3, Grade 1
  • Meets ADA requirements ANSI A117.1
  • Steel, Zinc Dichromated Chassis with Secure Thru Bolted design
  • Standard Duty lever trim option for 1000R & 2000R (Not recommended for SVR devices, Heavy Duty LE trim Recommended)
  • Installs in 2 1/8″ 161 door prep
  • Actuator: Cross shaped stainless steel
  • 5″ Solid Zinc Diecast lever
  • Projection: 2 7/8″ total projection
  • Lever Designs: Flat (standard, shown above) Curved, Half Curved, S-A & S-B (available with lever kits)
  • 3 3/8″ Wrought Brass Roses
  • Non-Handed Completely Reversible
  • Door Thickness: 1 3/4″ standard – available for 2″ thick doors, specify when ordering
  • Functions: Passage (no key), Storeroom & Entry
  • 6 Pin Brass, C Kwy, with 2 Keys std., Prepared for Small format IC core (less core)
  • 11 Popular competitor keyways available with replacement cylinders
  • Finishes: US3, US4 , US10B, US26, US26D
  • Limited Lifetime Warranty

 2P – Pull Trim

  • 2PStainless Steel or Steel Construction
  • Pull Plate: 3″ Wide x 13 7/8″ Height x 1/16″ thick
  • Pull: 3/4″ diameter hollow x 6 1/4″ ctc x 2 7/16″ projection
  • Application: Pull trim option for 1000R & 2000R. Will cover 161 door prep (Not recommended for SVR devices as rods can be hard to lift with rim cylinder tailpiece)
  • Thru bolted design thru bolts to head of exit device and to door with finish washer.
  • Will cover 161 door prep
  • Non-Handed
  • Door Thickness: 1 3/4″
  • Functions: 02DT Dummy, 03-NL Night latch (key retracts latch)
  • Accessories: 03-NL includes cylinder sleeve for installation into 161 door prep
  • Fasteners: Includes thru bolt posts, 1/4″-20 machine screws & finish washer for installation
  • Cylinders: Rim Cylinder required for 03NL (not included)
  • Optional: Rim cylinder housing for 6 or 7 pin Small format IC core (less core) also available but not included
  • Optional Keyways: 11 Popular competitor keyways available with replacement cylinders (not included)
  • Finishes: US3, US4 , US10B, US26, US32D
  • Limited Lifetime Warranty

TP – Thumbpiece Trim

  • TPStainless Steel Construction
    Steel, Zinc Dichromated chassis
  • Pull Plate: 3″ Wide x 13 3/4″ Height x 1/16″ thick
  • Pull: 3/4″ diameter hollow x 6″ ctc x 2 7/16″ projection
  • Application: Pull trim with thumbpiece control option for 1000R & 2000R (Not recommended for SVR devices as rods can be hard to lift with thumbpiece)
  • Thru bolted design thru bolts to head of exit device and to door with finish washer. Will cover 161 door prep
  • Non-Handed
  • Door thickness: 1 3/4″ standard – Add the suffix -TD for 2″ thick door
  • Functions: 02DT Dummy, 08 Entry, 08A Passage
  • Cylinder: 1 1/4″ Mortise Cylinder with std. cam (included) – 6 Pin Brass, C Kwy, with 2 Keys
  • Optional Cylinder: 1 3/8″ Mortise cylinder housing for 6 or 7 pin Small format IC core (less core)
  • Optional Keyways: 11 Popular competitor keyways available with replacement cylinders
  • Finishes: US3, US4 , US10B, US26, US32D
  • Limited Lifetime Warranty

DFP – Pull Trim

  • DFPStainless Steel or Steel Construction
  • Pull Plate: 3″ Wide x 8″ Height x 1/16″ thick x 1 11/16″ projection
  • Application: Economical pull trim option for 1000R & 2000R
  • Will cover 161 door prep (Not recommended for SVR devices as rods can be hard to lift with rim cylinder tailpiece)
  • Thru bolted design thru bolts to head of exit device.
  • Non-Handed
  • Door Thickness: 1 3/4″
  • Functions: 02DT Dummy, 03-NL Night latch (key retracts latch)
  • Accessories: 03-NL includes cylinder sleeve for installation into 161 door prep
  • Fasteners: Includes (4) thru bolts and 1/4″-20 machine screws for installation
  • Cylinder: Rim Cylinder required for 03NL (not included)
  • Optional: Rim cylinder housing for 6 or 7 pin Small format IC core (less core) also available but not includedOptional Keyways: 11 Popular competitor keyways available with replacement cylinders (not included)
  • Finishes: US3, US4 , US10B, US26, US32D
  • Limited Lifetime Warranty

Images courtesy of Design Hardware